Z77 went fubar after reset to defaults

ghostlyrich

Prominent
Jan 28, 2018
1
0
510
So after removing ai suite because it no longer worked. i was told I should go into the bios and reset to default. And so I did.



After that my computer went to restart and proceeded to never boot again no bios no nothing.



Steps I have done so far with out success



1. Removed GC then tried with a different graphics card



2. CMOS jumper for 10 seconds to clear CMOS



3.removed CMOS battery for a hour



4. Removed all ram, tried with one stick after that, try different ram all together



5. Tried different PSU



6.tried turning epu intelligence fan switch off



7.tried flicking GPU switch off



8.tried on board graphics both anolog and HDMI



9. Unplugged reset button



10.unplugged everything but graphics card and 1 stick of ram.



11. Removed everything from case





Please anything you can think of would be awesome.
 
Solution
see if your mb has the asus usb flashback port. if it does from another pc download the newest bios file. rename it per asus for your mb and with the pc off plug the usb stick into the usb flashback port and try to reflash it. if nothing happens the mb or power supply may have failed on you. i would try a test power supply.

Greg Gregorich

Distinguished
Feb 13, 2014
887
0
19,060
If you allready removed from the case. make sure you not touching electric parts if you have carpet floors in the room try simple steps place motherboard on the cardboard one memmory stick. cpu.cpu fan.connect psu navigate pwer button and power up see if cpu fan spins.
 
see if your mb has the asus usb flashback port. if it does from another pc download the newest bios file. rename it per asus for your mb and with the pc off plug the usb stick into the usb flashback port and try to reflash it. if nothing happens the mb or power supply may have failed on you. i would try a test power supply.
 
Solution