Possible Motherboard failure?

kybar007

Reputable
Nov 20, 2016
15
0
4,510
Hello everyone, my pc dont work as intended and here is what is happening.
Everything started a week ago (by everything i mean problems and weird things),when I was browsing internet my pc slowed down a lot to the point where I wasn't able to move my mouse.I had to restart pc but then it showed that no bootable device can be found and asked me to enter the BIOS setup also my SSD was not detected by BIOS.I decided to turn off pc and turn it on after 4-5 sec, and it started to boot normally like nothing happend. I checked the windows event viewer to see something suspicious but nothing was there only Critcal error that system got unexpectedly shut down. After few days it happend again. But like before solution was to turn off pc for 4-5 sec and turn on again, but it started to happening more often. I suspected my SSD. So I tested it after this weird freeze and HD Tune showed damaged blocks but after every reset in diffrent location, but If i would restart pc when it was working HD Tune error scan was full green. Today i did secure erase of disk and created new partition, S.M.A.R.T shows no errors on C4 and B2 only error was on value "Sata downshift due to error" RAW Value said 2 on that. Anyway after all this SSD works perfectly fine on my second PC i can move files create or format it without troubles but on my main PC its not even visible in bios(i've tried to swap SATA ports and nothing).
When i boot my PC from Pendrive with windows 10 and use diskpart i have weird values i mean free space is in every disk is 0B and in windows instalation My SSD is showed as 0B and free 0B (Screenshots below) i dont know what should i do now.
Sorry for bad english.


PC Spec:
CPU: Intel Core i7 4790k
Motherboad: H97N Wifi
RAM: 16GB GOOD RAM 2x8
PSU:Mars Gamin MP600 600W
GPU: GTX 1080 Asus Turbo
HDD: WD 1TB
1st SSD(the one with system and on this i performed secure erase): Kingston UV400 240gb
2nd SSD: GOODRAM CX300 240gb

Screenshots:
https://imgur.com/a/dpiaN

Dysk 0 is kingston
Dysk 1 is goodram
Dysk 2 is HDD WD

 

kybar007

Reputable
Nov 20, 2016
15
0
4,510


Only OS is Windows 10 Home on kingston (was because now disk is clean), Disk 0 as you can see on screenshot is after i cleaned it, it dont even have partition just empty disk and still instalation says 0MB

Also i tried to switch SATA mode from AHCI to IDE but nothing happend

On second PC i have windows 10 home

 

kybar007

Reputable
Nov 20, 2016
15
0
4,510

Already tried , also checked for any updates but only thing that resets is it changes boot from UEFI to Legacy.

 

kybar007

Reputable
Nov 20, 2016
15
0
4,510


I know, fast boot, disabled hot plug AHCI etc, all that stuff was prepared before doing anything with it

Here are screenshots from health programs as you wanted:
https://imgur.com/a/NMUAp