I was intalling a network card in my hp vectra vl400 pentium 3 1000 with a intel 815 chipset board while it was still plugged in (but not turned on) when i was putting the card in the metal bracket shorted some contacts behind the 1st pci connector between the agp port and the 2nd pci connector. When that happened a relay went off and the cpu fan would spin as long as the contacs were shorted. When i booted the computer all my bios options were reset. Im wondering if i could have shorted somthing important and if my cpu and board will be ok.
even though it posts im a bit of a worry wart so i just want to see if theres anything that can go wrong or if shorting it there shouldnt cause any problems in the future
Thanks!
hp vectra vl400 dual 20 gig hdds cd and dvd writer matrox g450 16 mb video card dlink xtreme g wifi card sound blaster live 5.1
picture of about where the metal shorted too
even though it posts im a bit of a worry wart so i just want to see if theres anything that can go wrong or if shorting it there shouldnt cause any problems in the future
Thanks!
hp vectra vl400 dual 20 gig hdds cd and dvd writer matrox g450 16 mb video card dlink xtreme g wifi card sound blaster live 5.1
picture of about where the metal shorted too