(BSOD) problems with brand new computer

tomislo007

Prominent
Feb 13, 2018
2
0
510
Hi,

BSOD is appearing always while performing a stress test with AIDA64 Extreme or playing video games. Every time is different error, and this is happening for about one week.
I performed these tests:
-memtest86
-System File Check or SFC
-Deployment Image Servicing and Management or DISM
-Stress test which is causing error, also when playing video games.

ALL TESTS WERE PERFORMED WITHOUT ANY ISSUES (EXCEPT STRESS TEST)

I also installed all driver again:
-Graphics card
-BIOS update with EZ Flash

It is a brand new custom build PC.

Specifications:
CPU Type: HexaCore Intel Core i5-8600K
Motherboard Name: Asus ROG Strix Z370-E Gaming
Motherboard Chipset: Intel Union Point Z370, Intel Coffee Lake-S
RAM: 2x Kingston HyperX KHX2133C14D4/8G (8 GB DDR4-2133 DDR4 SDRAM)
Graphics card: GeForce GTX 1050 Ti (4 GB) ASUS aura
BOOT Drive: SSD KINGSTON SHSS37A240G (240 GB, SATA-III)
Power supply: Corsair 650W
I did not change or overclocked any of its components.

These are the latest crash reports from DMP file:
On Tue 13-Feb-18 12:31:13 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\021318-7609-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x1756E0)
Bugcheck code: 0xEF (0xFFFFA50F8EE43080, 0x0, 0x0, 0x0)
Error: CRITICAL_PROCESS_DIED
file path: C:\WINDOWS\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a critical system process died.
There is a possibility this problem was caused by a virus or other malware.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



On Tue 13-Feb-18 12:31:13 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\MEMORY.DMP
This was probably caused by the following module: ntkrnlmp.exe (nt!PsSetLegoNotifyRoutine+0x4EF)
Bugcheck code: 0xEF (0xFFFFA50F8EE43080, 0x0, 0x0, 0x0)
Error: CRITICAL_PROCESS_DIED
Bug check description: This indicates that a critical system process died.
There is a possibility this problem was caused by a virus or other malware.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

I ve had errors before but it seems that windows can save only newer, but I have codes from these errors.
ERRORS:
-BAD POOL HEADER
-IRQL NOT LESS OR EQUAL
-MEMORY MANAGMENT
-SYSTEM SERVICE EXCEPTION
-PAGE FAULT IN NONPAGED AREA
 

tomislo007

Prominent
Feb 13, 2018
2
0
510
Ok, i ran stress test again with only 1x8gb of ram, and it ran for over an hour, like never seen before, then i switched 8gb of ram with other stick and stress test showed the same result. I put both 8gb of ram on the motherboard but now only 1 channel and everything it seems to be working for now without any issues.
But i discovered in task manager showing only 3 of 4 RAM slots, 2 slots are in use, third is not in use and fourth slot is not existing according to task manager.