Hello All,
I've just recently built my own PC with Ryzen 3 2200G, but it seems with everything plugged in correctly (yes I've seen and followed that thread for new pc beginners) I'm getting no display on my monitor. Any clue why? At this point I'm resorting to think that my motherboard's BIOS (Version 0602) may not be updated. Thanks for your help. Motherboard LEDs light up, all fans are spinning, all screws tightened, wires reseated. Nothing on the monitor. Just cycles through DV-I, HDMI and VGA, then goes to sleep. I should at least get into BIOS no? Even with an outdated BIOS like mine?
Specs:
Processor: Ryzen 3 2200G
Motherboard: Asus Prime B350M-K (BIOS version 0602)
PSU: Kolink Core 400 80+
RAM: Ballistix Sport LT 8GB DDR4 2400 and Crucial 4GB DDR4 2400 (I've tried just using one, in both slots, but still no go)
GPU: Gainward GTX 1050
Monitor: Acer KA22 FULL HD LED
I've just recently built my own PC with Ryzen 3 2200G, but it seems with everything plugged in correctly (yes I've seen and followed that thread for new pc beginners) I'm getting no display on my monitor. Any clue why? At this point I'm resorting to think that my motherboard's BIOS (Version 0602) may not be updated. Thanks for your help. Motherboard LEDs light up, all fans are spinning, all screws tightened, wires reseated. Nothing on the monitor. Just cycles through DV-I, HDMI and VGA, then goes to sleep. I should at least get into BIOS no? Even with an outdated BIOS like mine?
Specs:
Processor: Ryzen 3 2200G
Motherboard: Asus Prime B350M-K (BIOS version 0602)
PSU: Kolink Core 400 80+
RAM: Ballistix Sport LT 8GB DDR4 2400 and Crucial 4GB DDR4 2400 (I've tried just using one, in both slots, but still no go)
GPU: Gainward GTX 1050
Monitor: Acer KA22 FULL HD LED