I am build new PC, is outside of case, components are :
MSI Z370 A PRO,
i5 8400,
RAM HyperX Predator 16GB, 3000 Mhz 15CL / one stick /,
Seasonic S12ii-520W.
also I have DVD writer, SSD, FW PCI-e ,these are not connected. I have connected PWRSW cable from case to JFP1 pin 6-8 and CPU fan with i5 and RAM in DIMMA2, 24 pin ATX to Mobo and 4+4 pin to 8 pin CPU PWR. I have connected LED Monitor in VGA onboard. When I turn on machine, the CPU fan is going, no boot ,no display, only DEBUG LEDs are blinking between CPU and RAM.
I tried to CMOS reset, RAM reinstalling to all slots, reinstall CPU and fan,looking for bent pins on socket. Everything looking all right. I dont know what to do.I wrote to MSI support for compability with HyperX and thats ok. Please give me some new ideas guys .Thanks
MSI Z370 A PRO,
i5 8400,
RAM HyperX Predator 16GB, 3000 Mhz 15CL / one stick /,
Seasonic S12ii-520W.
also I have DVD writer, SSD, FW PCI-e ,these are not connected. I have connected PWRSW cable from case to JFP1 pin 6-8 and CPU fan with i5 and RAM in DIMMA2, 24 pin ATX to Mobo and 4+4 pin to 8 pin CPU PWR. I have connected LED Monitor in VGA onboard. When I turn on machine, the CPU fan is going, no boot ,no display, only DEBUG LEDs are blinking between CPU and RAM.
I tried to CMOS reset, RAM reinstalling to all slots, reinstall CPU and fan,looking for bent pins on socket. Everything looking all right. I dont know what to do.I wrote to MSI support for compability with HyperX and thats ok. Please give me some new ideas guys .Thanks
Facebook
Twitter
Instagram