RX 470 - Did I overclock correctly? (First time GPU overclocking)

Toggle sidebar Toggle sidebar
P

POPLOPUK

Prominent
Jun 27, 2017
3
0
510
isgtU4t.png

S1 400MHz, 800mV
S2 525MHz, 825mV
S3 700MHz, 850mV
S4 950MHz, 1000mV
S5 1200MHz, 1050mV
S6 1250Hz, 1080mV
S7 Max 1320MHz, 1105mV

Memory 1745MHz @ 1000mV

This was my first time overclocking and I ran it with these settings and they were stable for about 40 mins without crashing or artifacting(unigine superstition).

I tried lowering the State 7 Max voltage from 1105 to 1090 but then artifacts will appear. They go away at 1095 but I put it on 1105 just to be safe.

Power usage is at 85-105W and fans run at 60-70%

Card is GIGABYTE G1 GAMING(4gb)
 
Solution
RememberThe5th
We usually use MSI afterburner, but as far as card is stable there shouldn't be any worries.
You can damage card only by applying too much voltage (for instance if stock is 1.2V->1.35V would kill it i mean the temperatures not voltage but they go equal).
Sort by date Sort by votes
RememberThe5th

RememberThe5th

Illustrious
Jul 30, 2014
6,996
172
41,140
We usually use MSI afterburner, but as far as card is stable there shouldn't be any worries.
You can damage card only by applying too much voltage (for instance if stock is 1.2V->1.35V would kill it i mean the temperatures not voltage but they go equal).
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom