I am currently breadboarding because my PC was not turning on, but motherboard is not turning on during Breadboard

Toggle sidebar Toggle sidebar
N

nchu1688

Reputable
May 7, 2015
193
0
4,680
My pc was not turning on, so I decided to breadboard it. As you can see, the lights for the motherboard are on meaning that it should turn on. However, when I press the start button the motherboard does not turn on. I tried shorting the two pins (not sure which but I tried all) with a metal screw driver but it still did not turn on, any suggestions? Thanks.

Photo of motherboard: https://imgur.com/a/43QbT
 
Solution
Zerk2012
Put the cpu cooler on!!!!!!!!!! plug in the cooler fan, install one stick of memory, push the CMOS clear button at the bottom of the board, upper right hand push the reset button, make sure the power supply is switched on, push the mem OK button upper right side, push the start button upper right side.
Sort by date Sort by votes
Zerk2012

Zerk2012

Titan
Ambassador
Oct 6, 2014
21,396
2,038
104,240
Put the cpu cooler on!!!!!!!!!! plug in the cooler fan, install one stick of memory, push the CMOS clear button at the bottom of the board, upper right hand push the reset button, make sure the power supply is switched on, push the mem OK button upper right side, push the start button upper right side.
 
Upvote 0 Downvote
Solution
N

nchu1688

Reputable
May 7, 2015
193
0
4,680


thanks for the info I really needed it :). I know that some systems require a cpu fan to start. The problem is that I goofed up and threw my stock away when I bought my liquid cooling.

I will get a stock cooler tmrw. And notify you what happens..
 
Upvote 0 Downvote
Zerk2012

Zerk2012

Titan
Ambassador
Oct 6, 2014
21,396
2,038
104,240


You can puut the water cooler on it no need to buy a stock one.
Never start a PC without a cooler on the processor.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom