Hi All,
Just looking for advice on how to fix my current issue of my IO not working.
Basically my build (listed below) doesn't boot when pressing any of the IO buttons on the panel, however all RGB lighting, USB etc seems to work fine.
This is my first build so wasnt 100% sure with everything but I had some issues with the MOBO only having 1 USB header (my Corsair Connectcable for H80i, IO Panel and there was another but i cant remember needed to plug into this. I bought a cheap splitter off the internet however this still doesnt work.)
Any suggestions would be ace!
the case im using is the Aerocool P7-C1 Tempered glass edition: https://www.aerocool.com.tw/en/project7/case-p7/p7-c1-pro
PC Build:
https://pcpartpicker.com/user/MrMooreIOM/saved/hgJgsY
Many Thanks
Aaron
Just looking for advice on how to fix my current issue of my IO not working.
Basically my build (listed below) doesn't boot when pressing any of the IO buttons on the panel, however all RGB lighting, USB etc seems to work fine.
This is my first build so wasnt 100% sure with everything but I had some issues with the MOBO only having 1 USB header (my Corsair Connectcable for H80i, IO Panel and there was another but i cant remember needed to plug into this. I bought a cheap splitter off the internet however this still doesnt work.)
Any suggestions would be ace!
the case im using is the Aerocool P7-C1 Tempered glass edition: https://www.aerocool.com.tw/en/project7/case-p7/p7-c1-pro
PC Build:
https://pcpartpicker.com/user/MrMooreIOM/saved/hgJgsY
Many Thanks
Aaron