Blue empty screen after Crimson driver installed Radeon RX480?

Amigo1982

Distinguished
May 3, 2015
73
0
18,530
Hello,
Yesterday i purchased XFX Radeon RX480 Graphics card and i installed it on my ASUS Z370 motherboard on Windows 10 x 64 OS. Without driver installed, it show picture, but when i install some drivers like Radeon Adrenalin Edition 18.3.1 or 18.2.1 the screen became blue and empty. There is sound actually, but i can see picture only in BIOS and when load Windows. After that blue screen. This happens only with Display Port to HDMI adapter. The adapter works normally! it is not from the adapter. I am using Display Port Adapter to HDMI Brand Club 3D. HDMI port on the card is busy with another display. Even with HDMI disconnected (only DP to HDMI) the same problem. I tried on other display - no luck. Without adapter - HDMI to HDMI no problem and one more time the problem starts when install driver! No matter which Display Port i use. i do not want old version of driver like Crimson 16.9.2 because some settings missing! Please help me to resolve this as i spend so much money and time to make this configuration.
20180309_11493917hW2bxeveTqLGJgbdAFQ1520589860_sredna.jpg

Thank you.
 

Amigo1982

Distinguished
May 3, 2015
73
0
18,530
With Driver version 16.9.2 no problem, but missing options for 10 and 12 bit color depth also advanced color and brightness settings. I am using projector to the HDMI, so advanced brightness setup is important for me.