Hello everyone
I recently build a PC with the following specs:
Mobo: Asrock 970 Extreme 4 (latest Bios)
CPU: Athlon ii x4 640
Cooler: CM Hyper T3X Evo
PSU: Tacens Anima 500W
RAM: 4GB HP DDR3
HDD: Seagate 160GB Sata
Ram+HDD comes from an HP Intel Desktop.
Mobo has 8 pin connector but PSU only 4, as long as I dont need an FX processor or power demanding Graphic Card it will be fine as far as I know.
Im getting Code Error 05 which is related to CPU/Memory error. Sometimes it won't boot showing 05-19-36 error codes.
Things I've done:
- Remove/Install CPU+Cooler
- Ram stick switched to Kingston Hyperx Blu 4gb DDR3
- Remove Sata devices
I could just boot once into Bios after removing and plug in again the Sata devices + CLR CMOS.
Is there anything am I missing?
Anyone is having similar issues?
Kind regards
I recently build a PC with the following specs:
Mobo: Asrock 970 Extreme 4 (latest Bios)
CPU: Athlon ii x4 640
Cooler: CM Hyper T3X Evo
PSU: Tacens Anima 500W
RAM: 4GB HP DDR3
HDD: Seagate 160GB Sata
Ram+HDD comes from an HP Intel Desktop.
Mobo has 8 pin connector but PSU only 4, as long as I dont need an FX processor or power demanding Graphic Card it will be fine as far as I know.
Im getting Code Error 05 which is related to CPU/Memory error. Sometimes it won't boot showing 05-19-36 error codes.
Things I've done:
- Remove/Install CPU+Cooler
- Ram stick switched to Kingston Hyperx Blu 4gb DDR3
- Remove Sata devices
I could just boot once into Bios after removing and plug in again the Sata devices + CLR CMOS.
Is there anything am I missing?
Anyone is having similar issues?
Kind regards