So,my BIOS version is:305.I was messing around in the BIOS(l didn't change anything) and I saw an option called"reset my BIOS settings to optimized defaults" I click on that and now windows is not booting.I checked every setting it was the same.But,in the boot manager there was only windows boot manager.It used to be 4 boot prioritys before now it's only one and I can'te boot windows.
I reseted my BIOS by fault.
- Thread starter mafu6564
- Start date
Solution
feelinfroggy777
Glorious
- Dec 13, 2016
- 5,721
- 135
- 45,990
You reset your bios to factor settings and your boot priority was changed. You will need to update your boot priority to the drive that your OS is located on. When you go into the boot manager there should be an option to select your drives. Select the drive with your OS on put it on the top of the list and save your changes and exit the bios.
It will then boot into windows after it exits the bios.
It will then boot into windows after it exits the bios.
feelinfroggy777
Glorious
- Dec 13, 2016
- 5,721
- 135
- 45,990
feelinfroggy777
Glorious
- Dec 13, 2016
- 5,721
- 135
- 45,990
I dont think I can walk you through it on a forum as I am not familiar with that bios. Here is the manual for the laptop, go to page 69 as it addresses the boot priorities and may be able to show you have to set it up.
http://dlcdnet.asus.com/pub/ASUS/nb/GL553VW/0409_E11734_GL553VW_A.pdf?_ga=2.127939589.861227363.1521342800-2034953244.1514125086
http://dlcdnet.asus.com/pub/ASUS/nb/GL553VW/0409_E11734_GL553VW_A.pdf?_ga=2.127939589.861227363.1521342800-2034953244.1514125086
- Status
TRENDING THREADS
-
Question Using cloning software for a dying HDD which shows only 10% health ?- Started by Mashuumatics
- Replies: 1
-
-
News Windows 11 will reportedly display a watermark if your PC does not support AI requirements- Started by Admin
- Replies: 22
-
Question Recovering an old version of a Notepad file in Windows 10 ?- Started by MC72
- Replies: 2
-
Facebook
Twitter
Instagram