How many fans can be connected to my ROG Z3710E motherboard?
- Thread starter hulka
- Start date
Solution
Check your boxes if you have a molex to fan adapter somewhere. They're usually bundled with odd things like motherboards, cases, things...
It should look something like this:
(edit add)
If you have to order a cable somewhere, a fan cable splitter is probably a better solution than a molex adapter. The only way to control the fan speed if it's connected directly to the power supply is to have a dedicated fan controller in-between.
It should look something like this:
(edit add)
If you have to order a cable somewhere, a fan cable splitter is probably a better solution than a molex adapter. The only way to control the fan speed if it's connected directly to the power supply is to have a dedicated fan controller in-between.
therealduckofdeath
Honorable
- May 10, 2012
- 783
- 0
- 11,160
Check your boxes if you have a molex to fan adapter somewhere. They're usually bundled with odd things like motherboards, cases, things...
It should look something like this:
(edit add)
If you have to order a cable somewhere, a fan cable splitter is probably a better solution than a molex adapter. The only way to control the fan speed if it's connected directly to the power supply is to have a dedicated fan controller in-between.
It should look something like this:
(edit add)
If you have to order a cable somewhere, a fan cable splitter is probably a better solution than a molex adapter. The only way to control the fan speed if it's connected directly to the power supply is to have a dedicated fan controller in-between.
https://www.asus.com/us/Motherboards/ROG-STRIX-Z370-E-GAMING/
If you scroll down to the cooler by design section and select "4-pin PWM/DC fan" it'll show you the fan connector locations. Also page 1-15 in the manual. If those are already populated then you'll have to buy a splitter or controller.
If you scroll down to the cooler by design section and select "4-pin PWM/DC fan" it'll show you the fan connector locations. Also page 1-15 in the manual. If those are already populated then you'll have to buy a splitter or controller.
- Feb 18, 2010
- 30,566
- 321
- 107,640
use something like this with the 2 fans on one header they will pwm from board https://www.newegg.ca/Product/Product.aspx?Item=9SIAFFK6PP9148&cm_re=fan_splitter-_-9SIAFFK6PP9148-_-Product
TRENDING THREADS
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 58
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine
- Started by Admin
- Replies: 80
Facebook
Twitter
Instagram