Asrock H110M-ITX XMP profile is missing

Toggle sidebar Toggle sidebar
Status
Not open for further replies.
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
Hello there,
after the BIOS (v. 7.20) update yesterday, the XMP settings disappeared, also the CPU (i7 6700K) does not use the turbo boost anymore. Before upgrading bios, the memory worked at 2666 MHz, and the processor turbo boosted without a problem.Last night I sent an e-mail to AsRock, but I still have no answer. Did anyone have the same problem ?

Тhank you in advance !
 
Sort by date Sort by votes
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
Before the update, i had ram working on 2666 mhz and the CPU work most of the time on 4.2 ghz. Right now the CPU run on 4 ghz. In the bios the cpu turbo boost is ON, but doesn't work :(.
I send a message to AsRock and they say that the RAM can't run up to 2666 mhz on this motherboard ?! I can't understand what is going on here, but on bios v.7 i had XMP Profile and i can simple enable it ... so my ram was on 2666 mhz for the past year.
 
Upvote 0 Downvote
helpstar

helpstar

Titan
Dec 25, 2012
13,265
777
83,840
so did you try to get to v7 again?

you can check if the turbo works fine with prime95. Use version 26.6 so AVX won´t be so hard and run only one worker with the option smallFFT for single work load.
This should get the CPU to 4.2GHz. If not, check your temperature while doing this with coretemp
 
Upvote 0 Downvote
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
I try to load standard settings, also i flash the bios on the previous version (v. 7.0), but the XMP profile is gone :( I'm still waiting for AsRock support to answer on my ticket.
 
Upvote 0 Downvote
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
The version now is 7.0 I will try to reset the BIOS by jumper.

When I bought the motherboard then I used another processor, intel G4560 which runs with RAM up to 2400 mhz. Already there was an XMP Profile after I changed the processor with the i7 6700k, then I still had the XMP profile. Is it possible that the problem comes from updating the BIOS with a processor that supports up to 2133 MHz RAM, and this creates the problem of the disappearance of the profile. If the reset the BIOS by jumper didn't help, then I will try to put my old processor again and see if the XMP profile will appear.
 
Upvote 0 Downvote
helpstar

helpstar

Titan
Dec 25, 2012
13,265
777
83,840
in the beginning some BIOS versions for H110/B150,... boards allowed to overclock a "K" CPU, but Intel disabled this by updating the Intel Management Engine (part of the BIOS update). ASRock named this "DDR4 Non-Z OC" in the BIOS menu.
Maybe something there is not reversible anymore, if once updated.

Where in the BIOS do you search for XMP?
press F6 within BIOS to enter advanced mode, then it should be under "OC-Tweaker" -> dram configuration

eventually you can set the settings manually?
 
Upvote 0 Downvote
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
Here is photos from the BIOS which I did a few days ago (v 7.20). After returning to the previous version (v 7.00), the settings look the same way.

The first picture i pick from the AsRock website, Right there where is DRAM Information is a button XMP Profile, but i don't have it anymore.
Also when i press F6 on tab OC tweakers> DRAM Configuration i had XMP Profile before...
https://imgur.com/a/9iCVj
 
Upvote 0 Downvote
Z

z0mb1e

Commendable
Feb 12, 2017
10
0
1,510
I choose jedec with 2666MHz but nothing change. I leave a comments below the pictures in the previous comment. After i choose the 2666MHz its still show me 2133 in the bios, also in CPU-Z.
 
Upvote 0 Downvote
Status
Not open for further replies.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom