Does no heat from CPU mean it's dead in a computer that won't boot?

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685
My new computer won't boot that I built: https://ca.pcpartpicker.com/list/T366XP.

At first it wouldn't even power on because I later noticed that it was bent somehow (in 2 of the corners). I carefully bent it back and placed it in, and now it actually get power and the fans spin. I've tested RAM, PSU, and I'm using internal graphics. After lots of endless troubleshooting I tried to feel the CPU when I turned it on (just until I feel heat). There is absolutely no heat generated upon direct contact and I was wondering If that means the CPU is dead.

Side note: Why is "computers" an actual tag suggested on tomshardware? Aren't they all?
 
Solution
Actually most used cpus are relatively safe. As is, apart from obvious user abuse such as extreme voltages under extreme OC, delidding, or lapping, the cpu is the hardest component in a pc to kill. There's simply too many other components in tbe way. Just between the psu and cpu is the VRM's and mosfets, all kinds of microcontrollers, diodes etc etc even down to the traces in the mobo, all of which can and do fail long before a cpu gets hit. Cpus in general last an extremely long time, far beyond any reasonable expectation of usefulness. My 20yr old Pentium II 350MHz (OC for its entire life to 400MHz) still works just like day I bought it. A 20+ yr expected life is reasonable for a cpu
It's the software that renders them obsolete.

And...
The pins were bent 'somehow'? That means it's possible there was more/other damage. So I don't know if dead is the word I'd use, more like not working is more accurate.

It could be that the pins you bent back still aren't in exactly the right position. That would mean it would work, if you readjusted those pins. If a crack or something like that developed, even a microscopic one, that wouldn't be fixable and therefore it would be dead.
 

By "bent" do you mean the motherboard or the CPU?
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


the CPU
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


c108224c96487e090ac6366567ad5cdf.jpg


not my image but that's exactly what it looked like before I bent it back
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


Received it like this but decided to give it a try anyways because the company won't admit they sent a bent CPU. Lets just say i'm never buying there again.
 

USAFRet

Titan
Moderator


From where, so the rest of us know not to buy there.
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


mikes computer shop
 

USAFRet

Titan
Moderator


ummmm.....

Ford City PA
ABBOTSFORD , BC
Chilliwack, BC
Vancouver, BC
Somewhere else?

Which one?
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


Just from their website, I don't know where they shipped it from, somewhere in BC
 

USAFRet

Titan
Moderator


OK...those are all just parts of the same corporate "Mike's Computer Shop" whole thing.

In any case...your CPU is dead.
Was this advertised as "new"?
 

mcgge1360

Reputable
Oct 3, 2017
116
3
4,685


Ya I would never buy a used CPU, wouldn't know what' it's been through
 

Karadjgne

Titan
Ambassador
Actually most used cpus are relatively safe. As is, apart from obvious user abuse such as extreme voltages under extreme OC, delidding, or lapping, the cpu is the hardest component in a pc to kill. There's simply too many other components in tbe way. Just between the psu and cpu is the VRM's and mosfets, all kinds of microcontrollers, diodes etc etc even down to the traces in the mobo, all of which can and do fail long before a cpu gets hit. Cpus in general last an extremely long time, far beyond any reasonable expectation of usefulness. My 20yr old Pentium II 350MHz (OC for its entire life to 400MHz) still works just like day I bought it. A 20+ yr expected life is reasonable for a cpu
It's the software that renders them obsolete.

And yes, I own a i7-3770k bought from eBay 5 yrs ago that purrs at 1.32v, 4.9GHz. I actually have less issues (non so far) than with the i5-3570k I bought new that is not overclockable past 4.3GHz.
 
Solution