Here's my specs:
Gigabyte 990FXA-UD3 rev. 4.0 BIOS ver. F3
AMD 8150 BE
Geforce GTX 1070 8gb
16gb G-Skill Value Ram
1TB HDD
YES... ALL drivers are up to date!!!
I was using a liquid cooler on the processor until it died. And yes it died; I tested it on another system. So now I'm using the stock cooler that came with the AMD 8150 BE. The other day I started overheating and I also noticed that the fan on the proc wouldn't "spool" up to compensate for load (playing BF1). I didn't have this problem until right then!! I checked the BIOS settings and went as far as to change them in every combination I could think of but still overheating. The fan on the cooler does spin, It just doesn't "spool" up!
In the BIOS there are three parameters that can be changed:
Advanced /frequency Settings/Advanced CPU Core Features/Cool& Quiet = Enable/Disable
PC Health Status has 2 settings:
CPU Fan Control Mode = Auto/Voltage/PWM
CPU Fan Speed Control = Normal/Silent/Manual/Disable
I have tried every combination of these three parameters and it changes Nothing. Can I get my fan to just run at max? I know it's loud but I'm ok with it temporarily till I can actually spend some $$. Is my MB actually going dead?
My tech level is med to med -high so please be specific and thanks for any help in advance!
Gigabyte 990FXA-UD3 rev. 4.0 BIOS ver. F3
AMD 8150 BE
Geforce GTX 1070 8gb
16gb G-Skill Value Ram
1TB HDD
YES... ALL drivers are up to date!!!
I was using a liquid cooler on the processor until it died. And yes it died; I tested it on another system. So now I'm using the stock cooler that came with the AMD 8150 BE. The other day I started overheating and I also noticed that the fan on the proc wouldn't "spool" up to compensate for load (playing BF1). I didn't have this problem until right then!! I checked the BIOS settings and went as far as to change them in every combination I could think of but still overheating. The fan on the cooler does spin, It just doesn't "spool" up!
In the BIOS there are three parameters that can be changed:
Advanced /frequency Settings/Advanced CPU Core Features/Cool& Quiet = Enable/Disable
PC Health Status has 2 settings:
CPU Fan Control Mode = Auto/Voltage/PWM
CPU Fan Speed Control = Normal/Silent/Manual/Disable
I have tried every combination of these three parameters and it changes Nothing. Can I get my fan to just run at max? I know it's loud but I'm ok with it temporarily till I can actually spend some $$. Is my MB actually going dead?
My tech level is med to med -high so please be specific and thanks for any help in advance!