Hello,
I just bought a few upgrade parts for my rig.
I bought new Motherboardn CPU, GPU and harddrive
I have this:
Asus z97-a
16gb ddr3 ram
geforce 1070 gtx msi gaming
Intel I7
I kept my case and power supply
Antec 300 Case with
coolermaster 700watt power suply
this is the scenario
the rig starts and installs everything without the GPU installed. I use the onboard VGA card
It also starts and works perfect with my old VGA card
It starts perfect with the msi card installed in the pci slot, but without any powercables connected.
BUT
As soon a sI connect either one power cable (the 6 pin or 8 pin, or both)
the lights of the pc goes on, the fans rotate once, no sound, no nothing (light on msi GPU also turns on briefly)
Can i asume that my power suply isn't enough?
I ram through the sticky and checked everything
I have al this combined with 4 HDDs
Psu is a
cooler master rs-700-asaa-a1
thanks in advance
I just bought a few upgrade parts for my rig.
I bought new Motherboardn CPU, GPU and harddrive
I have this:
Asus z97-a
16gb ddr3 ram
geforce 1070 gtx msi gaming
Intel I7
I kept my case and power supply
Antec 300 Case with
coolermaster 700watt power suply
this is the scenario
the rig starts and installs everything without the GPU installed. I use the onboard VGA card
It also starts and works perfect with my old VGA card
It starts perfect with the msi card installed in the pci slot, but without any powercables connected.
BUT
As soon a sI connect either one power cable (the 6 pin or 8 pin, or both)
the lights of the pc goes on, the fans rotate once, no sound, no nothing (light on msi GPU also turns on briefly)
Can i asume that my power suply isn't enough?
I ram through the sticky and checked everything
I have al this combined with 4 HDDs
Psu is a
cooler master rs-700-asaa-a1
thanks in advance