Can't make my A-data XPG Gammix S10 SSD to show in BIOS, shows in hardware manager

Apr 3, 2018
6
0
20
So, I bought an A-Data XPG S10, and installed it in my ASUS Z170 Pro Gaming Motherboard, but the drive won't show up in BIOS.

I see it in the Windows hardware manager, but it wont show in disk management or anything else, trying to use the disk partitioner through CMD and then listing disks also showed that my SSD did not show up.

The SSD was installed in a system with an old HDD, I planned migrating it from the SSD to the HDD, but my plans seem to have been foiled for now.

Any ways to fix this?
 
Apr 3, 2018
6
0
20


I've suceeded in making the SSD appear in my boot options, but disk manager still doesn't show anything, nor can it be configured under my BIOS storage settings, no m2 ports are present even, only SATA ports, which I find odd.
 
It's an NVME drive, so that "might" be why it doesn't show up under sata config.
Is your uhh storage settings in the bios in AHCI or Raid mode? should be AHCI.
But you may have to set the M.2 slot to run in... not sata mode.
Are you SURE it doesn't show up under Disk Management? Can you screenshot what's there for us?