I got rid of wifi. I've been using two dongles to connect ethernet to iPhone. The apple USB camera adapter then a USB to ethernet adapter plugged into the Ethernet from my router. I'm now installing a full network with a POE switch. Is it possible to hook the POE cat6 directly into a female USB keystone and put into wall plate so that I can just use my regular USB to lighting cable that came with the phone and plug it into the USB to get Ethernet? Therefore bypassing the two dongles needed?
Cat6 to USB keystone for ethernet to iPhone without dongles
- Thread starter seandz707
- Start date
My guess is no but I am somewhat unclear what you are actually doing.
There are 2 type of usb to "ethernet". The first is a USB network adapter that is say a 10/100/1000 ethernet nic card. This will hook to any networking equipment just as if you had a internal ethernet port on the device....assuming you have the correct device drivers.
The other devices are not actually ethernet but many people call them that because they use the same cable. They do not actually send ethernet over wires. They more than likely are sending serial data over the wires. They are in effect a long USB cable, they are not a network adapters.
The 2 devices are used for 2 different purposes. The first type is used to connect to a network. The second is a way to get past the 15ft limitation on a USB cable.
There are 2 type of usb to "ethernet". The first is a USB network adapter that is say a 10/100/1000 ethernet nic card. This will hook to any networking equipment just as if you had a internal ethernet port on the device....assuming you have the correct device drivers.
The other devices are not actually ethernet but many people call them that because they use the same cable. They do not actually send ethernet over wires. They more than likely are sending serial data over the wires. They are in effect a long USB cable, they are not a network adapters.
The 2 devices are used for 2 different purposes. The first type is used to connect to a network. The second is a way to get past the 15ft limitation on a USB cable.
TRENDING THREADS
-
-
News Microsoft updates Windows 11 24H2 requirements, CPU must support SSE4.2 or the OS will not boot- Started by Admin
- Replies: 14
-
-
-
Question New Build GPU help- ASRock Steel Legend OC Radeon RX 7900 GRE - Keeps turning off
- Started by bp240
- Replies: 6
-
Question How can I make my AMD GPU scale *all* resolutions to 1080p, even resolutions that are "supported" by my TV?
- Started by Sol33t303
- Replies: 7
Facebook
Twitter
Instagram