Hi, I noticed that my CPU is downclocking my 2x2GB RAM from 1333mhz to 800mhz. cause my CPU FSB is 800mhz.
I read the MOBO manual and I saw that I need to adjust the RAM jumper to match to 1333mhz volt setting.
See here:
https://ibb.co/c42SnH
https://ibb.co/nbZJux
https://ibb.co/jsDBEx
I have changed the jumpers according to image NUM 3.
Then, I turned on the PC and entered to bios, and I saw that the CPU FSB has changed to 1333mhz, and the ddr3 has changed to 1066mhz and not to 1333mhz, why?
If I try to manually change the DRAM timing, when I restart the PC I am getting a black screen (no beeping) and only the fans are working, so I reset the CMOS.
I want them both to be at the same frequency 1333mhz.
CPU: E5700 800mhz Dual core.
RAM: 2x2GB DDR3 1333mhz.
Motherboard: G41M-GS3
Thanks in advance!
I read the MOBO manual and I saw that I need to adjust the RAM jumper to match to 1333mhz volt setting.
See here:
https://ibb.co/c42SnH
https://ibb.co/nbZJux
https://ibb.co/jsDBEx
I have changed the jumpers according to image NUM 3.
Then, I turned on the PC and entered to bios, and I saw that the CPU FSB has changed to 1333mhz, and the ddr3 has changed to 1066mhz and not to 1333mhz, why?
If I try to manually change the DRAM timing, when I restart the PC I am getting a black screen (no beeping) and only the fans are working, so I reset the CMOS.
I want them both to be at the same frequency 1333mhz.
CPU: E5700 800mhz Dual core.
RAM: 2x2GB DDR3 1333mhz.
Motherboard: G41M-GS3
Thanks in advance!
Facebook
Twitter
Instagram