- Apr 15, 2018
- 2
- 0
- 10
WD Blue 1TB SATA 6 Gb/s 7200 RPM 64MB Cache HDD
VGA 500 B1, 80+ BRONZE 500W Power Supply
AMD Ryzen 5 1600 Processor
MSI B350 TOMAHAWK AM4 AMD B350 SATA 6Gb/s USB 3.1 HDMI ATX AMD Motherboard
16gb RAM
GeForce GTX 1060
I am a first time builder having an issue with my new build that was just constructed and wired not booting from either the HDD or a USB flash drive with a Windows 10 iso. (Please keep in mind that I am not well versed and had a significant amount of trouble just getting this far.)
Upon initial activation of the PC, I can safely and successfully boot into the bios and change the boot settings from there. I have attempted using the HDD (in both Legacy and UEFI), as well as a bootable USB Flash drive (also in both Legacy and UEFI) with no success. Upon rebooting out of the bios, the Windows logo appears on the screen for around 5 seconds then the "loading turnstile" appears for around 1/4 of a second, then the monitor I have attached registers as "no signal" and shuts down.
I have attempted booting in Legacy and UEFI modes, readjusting the memory to fit the motherboard's manual and booting up through different USB slots.
I appreciate any help on this issue. If you have any questions or need clarification, I will answer to the best of my ability.
VGA 500 B1, 80+ BRONZE 500W Power Supply
AMD Ryzen 5 1600 Processor
MSI B350 TOMAHAWK AM4 AMD B350 SATA 6Gb/s USB 3.1 HDMI ATX AMD Motherboard
16gb RAM
GeForce GTX 1060
I am a first time builder having an issue with my new build that was just constructed and wired not booting from either the HDD or a USB flash drive with a Windows 10 iso. (Please keep in mind that I am not well versed and had a significant amount of trouble just getting this far.)
Upon initial activation of the PC, I can safely and successfully boot into the bios and change the boot settings from there. I have attempted using the HDD (in both Legacy and UEFI), as well as a bootable USB Flash drive (also in both Legacy and UEFI) with no success. Upon rebooting out of the bios, the Windows logo appears on the screen for around 5 seconds then the "loading turnstile" appears for around 1/4 of a second, then the monitor I have attached registers as "no signal" and shuts down.
I have attempted booting in Legacy and UEFI modes, readjusting the memory to fit the motherboard's manual and booting up through different USB slots.
I appreciate any help on this issue. If you have any questions or need clarification, I will answer to the best of my ability.
Facebook
Twitter
Instagram