CPU led red, even at the first step of breadboarding

Apr 15, 2018
2
0
10
Greetings,
I have the following setup:
AMD FX 8350
M5A99FX pro 2.0
2x8 Corsair ddr3 1600mhz RAM
GeForce 730 gpu
Raidmax vortex case
240 gb ssd
An additional 212 Evo fan

Trouble:
CPU LED is on, there is no display or any way to control the system. It “boots”, fans turn on, them nothing happens. There are no beeps from the speaker, nothing.

What I tried:
Went through 20+ suggested debugging steps on some thread on Tom’s hardware
Tried breadboarding (got it down to cpu, fan, mobo, psu (evga 600b) and the issue persists
Cleared out cmos
Suspecting that 212 might be a problem, switched back to stock. No change.

Please help ASAP. I will monitor this closely
 
Solution
1. Have you tried breadboarding with cpu, fan, mobo, psu, GPU and 1 stick of RAM? (first one stick, then the other)
2. Have you double checked all the power, Sata and video cables?