NO video out from a fresh build, Need help

Apr 18, 2018
2
0
10
I have built a system, my first, I installed everything and tried to boot up, I had no display out and my computer just boot cycles.

I don't know what to do and frankly I am a little scared. Here are my system specs;

Ryzen 2400g

asrock ab350m pro4

HyperX Predator 3000mhz (On motherboard compatibility list)

650w psu

nvme ssd 960 evo

2tb baracuda HDD

no graphics card



When I boot, my fans spin up and My case lights come onbut no output detected on the moniter, Have tried different moniters and cables. And again the computer turns off and then back on again after 15-20 seconds.



Any help or advice would be greatly apreciated!!
 
Solution
You need bios version 4.50 or greater to support the 2400G CPU. Look on the box that that the mobo came in. Usually, there's a sticker with the bios version installed at the factory. If the bios version is earlier than this, there are 2 solutions. Return the mobo, and be sure they replace it with mobo that is updated. Or, contact AMD, they will loan you a CPU to do the bios update. Unfortunately, you will need to find a GPU to borrow to do this option.
You need bios version 4.50 or greater to support the 2400G CPU. Look on the box that that the mobo came in. Usually, there's a sticker with the bios version installed at the factory. If the bios version is earlier than this, there are 2 solutions. Return the mobo, and be sure they replace it with mobo that is updated. Or, contact AMD, they will loan you a CPU to do the bios update. Unfortunately, you will need to find a GPU to borrow to do this option.
 
Solution
Apr 18, 2018
2
0
10


That's the one, did some research and I have bios 3.0 Thankyou very much and I will tak my computer to a facility that supports bios flashing :)
 

TRENDING THREADS