I have an old GPU (GTX 560 Ti Founders Edition), and after a really bad Furmark burn-in test (82° with a whopping 100% fan, open-air test bench) I performed a Re-Tim.
While Re-tim-ing I noticed that the thermal pads were in a really bad condition and were poorly applied in the first place, In both Memory chips and VRMs.
Re-tim Did help, but temps were still far from desirable. So one of my possible solutions is to Re-Pad as well.
GPU Picture: http://www.guru3d.com/miraserver/images/2011/gtx560/IMG_3423-750.jpg
TL;DR: Which Thermal Pad thickness do I need to get for my GTX 560 Ti Founders Edition?
And more importantly, where can I find that information about other cards, without bothering anyone else?
While Re-tim-ing I noticed that the thermal pads were in a really bad condition and were poorly applied in the first place, In both Memory chips and VRMs.
Re-tim Did help, but temps were still far from desirable. So one of my possible solutions is to Re-Pad as well.
GPU Picture: http://www.guru3d.com/miraserver/images/2011/gtx560/IMG_3423-750.jpg
TL;DR: Which Thermal Pad thickness do I need to get for my GTX 560 Ti Founders Edition?
And more importantly, where can I find that information about other cards, without bothering anyone else?
Facebook
Twitter
Instagram