- Apr 22, 2018
- 1
- 0
- 10
Hello, yesterday i accidentaly knocked over a glass of water on my case, i immediatly shut down Windows. Since it took so long, i switch it of via PSU switch without a proper shutdown.
Took out all parts, tried to locate the damage but there was no water,anyway i put them back together and gave it a go. First, no posting,no beep but it had power, fans were working except CPU fan. Then a couple of minutes later CPU fan worked too. But it still got no post, no beep or display. Also holding down power button wont shut it down.
I tried Rams one by one,tried CMOS reset, took out bios battery, controlled all cables in case any damage. I believe i fried my MB because of water. Whats your opinion on this and what should i do next?
Took out all parts, tried to locate the damage but there was no water,anyway i put them back together and gave it a go. First, no posting,no beep but it had power, fans were working except CPU fan. Then a couple of minutes later CPU fan worked too. But it still got no post, no beep or display. Also holding down power button wont shut it down.
I tried Rams one by one,tried CMOS reset, took out bios battery, controlled all cables in case any damage. I believe i fried my MB because of water. Whats your opinion on this and what should i do next?
Facebook
Twitter
Instagram