Here's the build
https://pcpartpicker.com/list/fBRjpG
rying to connect the GPU to the PSU safely, don't want to do anything that will cause fires and according to google what I did wasn't proper
So the GPU has a 6-pin connector for the PSU on it. My PSU is semi-modular, and the cable labeled "VGA" only has 6+2 pin connectors. Firstly, I want to be absolutely sure leaving 2 of those OUT won't cause any issues with my PC. If this is a safe thing to do and the preferred method, please LMK
Secondly, the GPU itself came with a 6-pin connector that leads to 2 molex connector. Basically looks like this https://i.stack.imgur.com/TQmVO.jpg
My PSU has a connector labeled "PERIF" which can connect to both of the molex slots (I want to add that the connector included with the GPU had 3 "pins" coming out of it, whereas the one from the PSU has 4 "slots" for the pins). Is it safe to connect the GPU using these connectors? This is what I did already but it just seems off, and according to some Google searches its quite unsafe. I only started the PC for about 20 seconds like this so I don't think any damage is done yet
For reference, this guy seems to have the same GPU and molex connectors mentioned
https://youtu.be/WmVZJkCYINM?t=5m57s
Or do I need to purchase a new cable for the GPU?
https://pcpartpicker.com/list/fBRjpG
rying to connect the GPU to the PSU safely, don't want to do anything that will cause fires and according to google what I did wasn't proper
So the GPU has a 6-pin connector for the PSU on it. My PSU is semi-modular, and the cable labeled "VGA" only has 6+2 pin connectors. Firstly, I want to be absolutely sure leaving 2 of those OUT won't cause any issues with my PC. If this is a safe thing to do and the preferred method, please LMK
Secondly, the GPU itself came with a 6-pin connector that leads to 2 molex connector. Basically looks like this https://i.stack.imgur.com/TQmVO.jpg
My PSU has a connector labeled "PERIF" which can connect to both of the molex slots (I want to add that the connector included with the GPU had 3 "pins" coming out of it, whereas the one from the PSU has 4 "slots" for the pins). Is it safe to connect the GPU using these connectors? This is what I did already but it just seems off, and according to some Google searches its quite unsafe. I only started the PC for about 20 seconds like this so I don't think any damage is done yet
For reference, this guy seems to have the same GPU and molex connectors mentioned
https://youtu.be/WmVZJkCYINM?t=5m57s
Or do I need to purchase a new cable for the GPU?