PC randomly shuts off, won't power on.

Apr 22, 2018
5
0
10
Hello! First timer on this forum.

I custom built my PC about 1.5 years ago, and it was running perfectly fine up until yesterday night.

Before I go into detail, here is my rig : https://pcpartpicker.com/user/thomaslai59/saved/Hn7bjX

I added the extra RAM, HDD, & SSD about 1 month ago.

I used my computer the morning of yesterday to play some games and it worked fine. Had to step out the house and when I got back to my computer late night (probably 13 hour gap) the computer was off. Went to press the power on button and nothing happened. No fans spun at all, no lights, or anything. Usually my MOBO has a LED Light that shows however it didn't either. The weird thing is that the rgb light was lit on my keyboard & mouse (both connected directly to my mobo usb slots).

I took apart my case to double check any loose cords, and made sure to reseat the RAMs and etc. I also tried removing part by part and trying to power it on but no luck either. I thought it could've meant that my PSU died however I did the paperclip test and it passed. Does this mean my MOBO is completely dead?

Thanks in advanced.
 
Solution


Refer to your motherboard manual for 'Power button' pins. They are two pins present in a group of pins collectively known as 'Front Panel connectors'. The two pins that correspond to the power button need to be bridged together with a conductor, like a screwdriver. This eliminates the need to press the power button to start up the system, could [strike]be[/strike] fix the issue here. Also, stating the obvious - make sure your power supply switch is on, if there is one.
Apr 22, 2018
5
0
10


How would I do this?
 
Apr 22, 2018
5
0
10


Would I only remove the two RAM sticks I added recently? or only seat 1?
 
Apr 22, 2018
5
0
10


Edited: wrong response
 


Refer to your motherboard manual for 'Power button' pins. They are two pins present in a group of pins collectively known as 'Front Panel connectors'. The two pins that correspond to the power button need to be bridged together with a conductor, like a screwdriver. This eliminates the need to press the power button to start up the system, could [strike]be[/strike] fix the issue here. Also, stating the obvious - make sure your power supply switch is on, if there is one.
 
Solution
Apr 22, 2018
5
0
10


Will try later tonight and update you, thanks!