Can't post after switching ram slots

Nov 12, 2017
10
0
510
Specs:
CPU: Ryzen 3 1200
GPU: Geforce GTX 1050ti 4gb
Motherboard: ASUS PRIME A320M-K
PSU: EVGA 450bv 80 plus bronze
RAM: Corsair value select 8gb ddr4 2133mhz 1x8
HDD: WD Blue 1tb
Soo it all started when i switched ram slots, i opened my pc and it didnt post, i restarted and when my pc booted, it beeped 3 times(Base 64 K RAM failure) and restarted by itself, this repeated 3 times until it finally booted but without posting, i then switched the ram back on its original slot and when i booted i head 2 quick beeps (Parity circuit failure) but i still wasnt able to post. Any other time i tried booting i heard absolutely no beeps(Even when removing the gpu and trying to boot, i heard no beeps). I tried removing the psu power supply cord, held the power button for a minute and then booted again but without any success. I also reset CMOS by removing the battery and with a jumper 3-4 times without succes again
I then borrowed some Ballistix Crucial 8gb ddr4 ram from my friend to see if my ram was faulty but i wasnt able to post then either. I gave him my RAM and his pc posted normally. What i wanna ask is wether it's my motherboard's problem and the beeps indicating that the ram was faulty were because the ram slots were bad, or could it be something else in my pc?
I have already ordered a new Motherboard (MSI b350 PC mate) but i'm worried it could be something else. Thanks for your time.
 
Nov 12, 2017
10
0
510

I tried booting with the ram on both slots and it didn't post, my friend's ram occupied both slots on my motherboard and it still didn't post sooo..