Not enough Sata power

Toggle sidebar Toggle sidebar
C

Cyress

Reputable
Jul 7, 2016
17
0
4,520
Hi, im making a custom build, but after installing new fan + fan hub + rgb dongle, usb hub and finally rgb led strip (corsair LL120 fan , silverstone fan hub , corsair rgb link , nzxt internal usb hub, corsair rgb led strip ) . Then i face an issue, they’re all powered by sata which i dont have enough on my psu to plug all those sata connector + 3ssd. Psu can drive enough power as its a 850wplatinum

So is there a dongle out there to split sata power in lets say 1in-5out or something else than y-splitter as im pretty sure those device dont use a lot of power

Thank you
 
Solution
P
I could not find a sort of Hub that provides many SATA power outputs on one box. Closest I could find was this concept. One is a Splitter that converts one 4-pin Molex female power output connector to four of the same

https://www.newegg.com/Product/Product.aspx?Item=9SIA9F95877121&cm_re=molex_splitter-_-9SIA9F95877121-_-Product

Then you could buy four of these items that each convert a female Molex to two SATA power outputs, and plug them into the four outputs of the first. The result would be eight SATA power output connectors drawing from one PSU Molex power output. It's not as neat as a single box, but is uses relatively few splitters and they're all black. I saw also a three-output version of that first item, in case you need only...
Sort by date Sort by votes
C

Cyress

Reputable
Jul 7, 2016
17
0
4,520
As i mentioned in the post. Looking for something else than y-splitter. Those splitter arent an option ( it will require to plug like 5-6 y-splitter on each other )

Any other idea ???

P.S. forgot to say that my build is purely esthetic ( custom sleeved psu and every single wire in the case
 
Upvote 0 Downvote
P

Paperdoc

Polypheme
Ambassador
Oct 19, 2006
11,269
1,028
69,340
I could not find a sort of Hub that provides many SATA power outputs on one box. Closest I could find was this concept. One is a Splitter that converts one 4-pin Molex female power output connector to four of the same

https://www.newegg.com/Product/Product.aspx?Item=9SIA9F95877121&cm_re=molex_splitter-_-9SIA9F95877121-_-Product

Then you could buy four of these items that each convert a female Molex to two SATA power outputs, and plug them into the four outputs of the first. The result would be eight SATA power output connectors drawing from one PSU Molex power output. It's not as neat as a single box, but is uses relatively few splitters and they're all black. I saw also a three-output version of that first item, in case you need only six SATA connectors for power.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom