AHCI vs RAID Mode

Toggle sidebar Toggle sidebar
B

box o rocks

Distinguished
Apr 9, 2012
750
10
18,985
Is there any performance loss when running a mechanical HDD in RAID mode compared to AHCI mode? Win 10 was inadvertently installed while the SATA mode was set to RAID, and it seems slow to boot.
 
Solution
Solandri
There's no performance loss once the computer is up and running (RAID is a superset of AHCI). But the point of the RAID setting is to allow you to create bootable RAID volumes. So if the motherboard is set to RAID, during the boot cycle it will temporarily transfer control to the RAID BIOS which will look for bootable RAID volumes, and give you a few seconds to hit a hotkey to enter the RAID configuration menu. This can add anywhere from 3-15 seconds to the boot time in my experience.

If this is a single drive and you did not set up any RAID volumes before or while installing Windows, you can try switching it to AHCI mode to see if it'll boot. As stated above, RAID is a superset of AHCI. So if you're not using any RAID-specific...
Sort by date Sort by votes
Solandri

Solandri

Illustrious
Jan 4, 2012
4,919
98
39,240
There's no performance loss once the computer is up and running (RAID is a superset of AHCI). But the point of the RAID setting is to allow you to create bootable RAID volumes. So if the motherboard is set to RAID, during the boot cycle it will temporarily transfer control to the RAID BIOS which will look for bootable RAID volumes, and give you a few seconds to hit a hotkey to enter the RAID configuration menu. This can add anywhere from 3-15 seconds to the boot time in my experience.

If this is a single drive and you did not set up any RAID volumes before or while installing Windows, you can try switching it to AHCI mode to see if it'll boot. As stated above, RAID is a superset of AHCI. So if you're not using any RAID-specific functionality, the two modes should be indistinguishable to Windows. Even if it doesn't boot, a Windows Repair should be able to get it working under AHCI mode. But if you set up the drive as a RAID volume, then you're probably stuck with it, and would need to wipe and reinstall to correct it.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom