- May 5, 2018
- 5
- 0
- 10
After instaling a new ssd drive I cant get the old one to work.
Please see the image
Any help would be much appreciated
Thanks
Need help with my hard drive not showing
- Thread starter mattst1974
- Start date
After instaling a new ssd drive I cant get the old one to work.
Please see the image
Any help would be much appreciated
Thanks
Solution
From Section 1_8 in your user manual
Which specific m.2 port are you using, and which specific SATA port are you using?
tubagznyven
Distinguished
- Nov 9, 2013
- 658
- 1
- 19,360
try go to your mobo BIOS and if im not wrong go look at peripheral or somewhere there,if it is detected turn on CSM on (it is on my gigabyte mobo) then restart it
- May 5, 2018
- 5
- 0
- 10
Found the CSM in my BOIS but it is enabled
The SSD is a NVMe SSD 960 EVU M.2 250GB
My board is a Gigabyte GA-Z170X-UD3
Not sure what make my old hard drive is but in the BOIS it's called ATAPI iHAS12 ATAP
The SSD is a NVMe SSD 960 EVU M.2 250GB
My board is a Gigabyte GA-Z170X-UD3
Not sure what make my old hard drive is but in the BOIS it's called ATAPI iHAS12 ATAP
- May 5, 2018
- 5
- 0
- 10
I can see the hard drive in my BIOS and it says enabled.
Must be something in the BIOS that I'm not doing right
Must be something in the BIOS that I'm not doing right
- May 5, 2018
- 5
- 0
- 10
- May 5, 2018
- 5
- 0
- 10
Thanks I moved the SATA cable to port 5 now it shows up
You are a hero!!
Very impressed with all the help I have had from all the people on here
You are a hero!!
Very impressed with all the help I have had from all the people on here
TRENDING THREADS
-
-
-
Question Help in troubleshooting possible graphics card issue?
- Started by nort99
- Replies: 5
-
Question RX 6600 visual glitches right after upgrading to it- Started by Wamek
- Replies: 4
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 35
-
Facebook
Twitter
Instagram