Slow start up ( Q-code -B1 runtime set virtual address map end)

Toggle sidebar Toggle sidebar
B

bonwatcher

May 8, 2018
3
0
10
Hello, i have been running into this problem every so often, where at start up my pc is very slow. In more details after the bios indication, when the windows screen is loading with the little circle spinning, it is very slow to pass this stage and reach the user screen. I have been looking my q-code during this time which last for about 30secs-1 min, and the q-code b1 (runtime set virtual address map end) is showing on my motherboard. My OS (windows 10) is running in a kingston SSD (2years old). I was wondering why it takes so much time to pass this stage of loading to get on my start up user screen. In 2 years i have also gotten 2-3 blue screens( i dont remember what the problem was at the time, but i havent gotten any for months now)

CPU- i7 4970k
GPU- Gigabyte gtx970 g1 gaming windforce edition

Ram- 8gb hyperX 1600mhz (CL 9)
Motherboard- Asus MAXIMUS VII RANGER

PSU- Corsair 650 RM series
SSD- Kingston SSDNow V300 120GB (30gb free space)
 
Solution
K
I am having the same issue as OP.
When I cold boot or restart, I get stuck on loading Windows with the Q-Code of B1 for anywhere between 2-4 minutes before reaching my desktop. Once Windows has loaded, my PC works perfectly fine/normal.

My system is a few years old with the same CPU & RAM since day 1 and the GPU was upgraded over a year ago. I did recently install an SSD into a PCI-E slot to use as a boot drive (Win10) and it was working fine for about a month (there is no validity to xoutostrela's answer since I have more than 50% free space on it). Then I added a second monitor and this is when the slow boot started. This is the part that has stumped me since adding a second monitor should not cause this and it doesn't go away when I...
Sort by date Sort by votes
xoutostrela

xoutostrela

Honorable
Dec 19, 2017
51
2
10,565
Just so you know after 2 years this SSD has lost some of it's life..
And you have 30GB of free space.. Well that's your problem..
SSD's need alot of free space so they can run at their high speeds..
Just like an HDD after you fill 50% of it speed will slow down really quick...
You need to delete some stuff and let only the programs that you really need..
Buy an 1TB Hdd so you can have backups ..
If you want your SSD to work faster again let him have at least 50% free space..
Or download some softwares that check the life of your SSD...
I hope I helped you.
 
Upvote -1 Downvote
B

bonwatcher

May 8, 2018
3
0
10


 
Upvote 0 Downvote
B

bonwatcher

May 8, 2018
3
0
10
I dont think this is the problem here. It still runs at the same speed as it used to, i can see the read and write speed from the task manager. Also this was a problem even before i had 30gb of free space. This happens mostly when tthe pc restarts. It takes too much time to load to the user interface. At start up this is rare to happen, but at restart it always happens.
 
Upvote 0 Downvote
K

krutonious

Reputable
Jun 3, 2018
3
0
4,520
I am having the same issue as OP.
When I cold boot or restart, I get stuck on loading Windows with the Q-Code of B1 for anywhere between 2-4 minutes before reaching my desktop. Once Windows has loaded, my PC works perfectly fine/normal.

My system is a few years old with the same CPU & RAM since day 1 and the GPU was upgraded over a year ago. I did recently install an SSD into a PCI-E slot to use as a boot drive (Win10) and it was working fine for about a month (there is no validity to xoutostrela's answer since I have more than 50% free space on it). Then I added a second monitor and this is when the slow boot started. This is the part that has stumped me since adding a second monitor should not cause this and it doesn't go away when I remove the second monitor from the mix.

There is not much information online about the B1 Q-Code but what I was able to find states that it is related to RAM or the memory controller. So I tried removing all RAM sticks and testing one by one in each slot but I still get the same behavior. It would be nice if a solution can be found for this issue.

CPU - i7 4790k @ 4.4GHz & 1.21v
MB - Asus Maximus VII Hero
RAM - 4x 4GB G-Skill Trident 2400MHz (set of 4 in a single package)
GPU - MSI RX480 8GB @ stock
PSU - Corsair AX860i
SSD1 - Samsung 120GB PCI-Ex4 NVME installed in an adapter in the last GPU slot (x4) (OS install with some apps)
SSD2 - Intel 500GB (games and other apps installed)
HDD1 - WD Black 500GB (used for linking Downloads, Documents, Pictures, Videos, Desktop, TEMP and other cache folders off of the OS drive to save space and writes)
HDD2-5 - Additional storage and redundancy

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Well, I just did the platform update for Windows 10 (from 1709 to 1803) and the issue seems to have disappeared now...
Strange that something that seems like a hardware issue would be caused by Microsoft software... or is it?!?!?!
dun-dun-duhhhhhhhhhhhhhhhhhhhhhh!

So OP, try updating your Windows 10 to the new platform update and see if your issue disappears. It would be nice to confirm if this is indeed a Windows 10 issue and not hardware from more than one user.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Just posting an update: my hardware has not changed since the last post but the issue comes and goes randomly with Windows updates, further enforcing this as an issue with Microsoft Windows software (at least in my case).
 
Last edited:
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom