moving mobo and every other piece to new case

Toggle sidebar Toggle sidebar
sergio.lopezsevilla

sergio.lopezsevilla

Prominent
Jan 2, 2018
89
0
640
So the title says it all will this mess anything up becuase my current case i got when i just bought the cheapest things i could get but i upgraded and now everythings good except for the psu which has the wires twisted and rly squeezed in there because its a little big,so anything to worry for?
 
Solution
Chicano
Issues that can occur or coincide with migrating systems to a new case:

1. PSU failure
2. BIOS corruption
3. Dead motherboard
4. PSU connection errors
5. RAM installation issues (if removed)
6. Front panel header connection errors
7. ElectroStatic Discharge damage


1. Not a problem (if it should happen) if your intention is to replace it.
2. If it should happen, a simple BIOS reset should take care of it.
3. Extra care and ESD protection should be observed to prevent the possibility
4. Make sure all connections are a snug fit
5. Leave the RAM alone and if you must remove it, be sure to re-install it properly
6. Make a front panel connections wiring diagram on paper to use as a guide when connecting the mobo to new case wiring...
Sort by date Sort by votes
Chicano

Chicano

Judicious
Aug 29, 2011
5,071
29
35,490
Issues that can occur or coincide with migrating systems to a new case:

1. PSU failure
2. BIOS corruption
3. Dead motherboard
4. PSU connection errors
5. RAM installation issues (if removed)
6. Front panel header connection errors
7. ElectroStatic Discharge damage


1. Not a problem (if it should happen) if your intention is to replace it.
2. If it should happen, a simple BIOS reset should take care of it.
3. Extra care and ESD protection should be observed to prevent the possibility
4. Make sure all connections are a snug fit
5. Leave the RAM alone and if you must remove it, be sure to re-install it properly
6. Make a front panel connections wiring diagram on paper to use as a guide when connecting the mobo to new case wiring.
7. If possible use an Anti Static Wrist Strap or frequently touch the case metal both when removing the components from the old case and when installing them on the new one.


How to Clear CMOS to Reset BIOS Settings
https://www.intel.com/content/www/us/en/support/articles/000025368/processors.html

How to Install RAM
https://www.digitaltrends.com/computing/how-to-install-ram/

Anti-Static Wrist Strap
https://www.amazon.com/Zitrades-Static-Wrist-Strap-Grounding/dp/B009Z9SLTE/ref=pd_lpo_vtph_147_lp_t_3?_encoding=UTF8&psc=1&refRID=ZQES9TX9E6ZMNWXQZ9DT

Prevention of Electrostatic Discharge Damage
https://www.juniper.net/documentation/en_US/release-independent/junos/topics/reference/safety/prevent-esd-damage.html








 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom