How to get wifi in my whole building

Toggle sidebar Toggle sidebar
R

Ron Yu

Reputable
Jul 24, 2014
33
0
4,530
Hi guys,

Any recommendations on what to use to get my building have wifi. right now i only have one router thru one floor.

I heard extenders are not good.

Thanks
 
Solution
drbones8472
If you can get an Access Point Per (AP) per floor, then connect them to the same router/switch. You can then use the "Bridge" function with the AP's to make them all the same network, that way you dont have to reconnect to a new AP each time you go to a different floor. The Bridge function should basically make switching APs an automatic thing. Something you might try first is just getting a single one of those APs and see if it can penitrate the concrete floor/cieling. If it can then that is pretty much all you should need to do. But if it cant, or has a week signal, then you can always buy more.
Sort by date Sort by votes
drbones8472

drbones8472

Distinguished
Apr 3, 2010
266
0
18,960
This is what I use:

UniFi Enterprise WiFi System AP Long Range UBIQUITI NETWORKS QA UAP-LR
https://www.amazon.com/gp/product/B005H4CDF4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

I have this in the middle of a 3500sqft house made of hardwood that was built in 1916. I can be 150feet outside of my house and I still get a bar from this access point.

You may get different results. I dont know what your building is made of, so I cannot speak to how it will perform exactly, but at the very least I know it works through multiple layers of hardwood, wooden slats, and textured plaster.
 
Upvote 0 Downvote
R

Ron Yu

Reputable
Jul 24, 2014
33
0
4,530


thanks! my walls are made of cement.
Im thinking if i should get a router as Access points per floor? or try google home? (not sure if both means that i have to reconnect to a different network per floor)
 
Upvote 0 Downvote
drbones8472

drbones8472

Distinguished
Apr 3, 2010
266
0
18,960
If you can get an Access Point Per (AP) per floor, then connect them to the same router/switch. You can then use the "Bridge" function with the AP's to make them all the same network, that way you dont have to reconnect to a new AP each time you go to a different floor. The Bridge function should basically make switching APs an automatic thing. Something you might try first is just getting a single one of those APs and see if it can penitrate the concrete floor/cieling. If it can then that is pretty much all you should need to do. But if it cant, or has a week signal, then you can always buy more.
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom