6600k 4.5ghz stable oc help

Toggle sidebar Toggle sidebar
S

sasbence29

May 10, 2018
4
0
10
I OC'd my 6600k to 4.5 ghz, i set a +0.12 offset vcore, and its unstable in a veird way. I keep getting windows bluescreens, but cinebench and bf1 runs fine for an hour. CPU-Z says vcore is at 1.3 when it should be at 1.32 (1.2+0.12) I have an asrock fatality z170 board. My previous oc with 4.2 ghz stock vcore was fine. Couldn't get 4.4 with stock vcore though.
 
Solution
Z
if i remember it correctly, lvl1 llc is the highest one, and can over compensate the voltage, i would set the llc to level 2 or even level 3 and bump the voltage by 1~2 increment based on your testing. and give that a try. you want stability at both low load and high load,
Sort by date Sort by votes
Z

zyh1987

Estimable
Mar 16, 2018
2,146
9
3,065
what's your llc setting? was it on auto? i'm thinking that perhaps your voltage is too low for low loads, and when when you run loads, llc bumped it to reasonable voltage. i would increase voltage by 1 more increment and see if there is any improvements.

also try running the windows @ performance mode, as sometime the power saving feature will lower the voltage to a unstable level.
 
Upvote 0 Downvote
S

sasbence29

May 10, 2018
4
0
10


 
Upvote 0 Downvote
S

sasbence29

May 10, 2018
4
0
10


 
Upvote 0 Downvote
Z

zyh1987

Estimable
Mar 16, 2018
2,146
9
3,065
if i remember it correctly, lvl1 llc is the highest one, and can over compensate the voltage, i would set the llc to level 2 or even level 3 and bump the voltage by 1~2 increment based on your testing. and give that a try. you want stability at both low load and high load,
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom