Asus Maximus x hero wi fi errors

Toggle sidebar Toggle sidebar
C

crusader7925

May 11, 2018
5
0
10
I just finished building my first pc and it seems to be working but I get several errors on the board.

Asus Maximus X Hero with wi fi
i7 8700k
Two Samsung NVMe 960 Pro
GeForce gtx 980
Corsair h150 pro AIO
G.Skill DDR4 3200 8G Ram x2

The errors are 27, 29, 30,33,34,35

Also if I use the XMP overclock, on startup the system will turn on for a second, shut down, then start back up normally. Doesn't do it if its not overclocked.

No fan lights on the Corsair come on either. The cooler on the processor light is on and all the other fan lights are on but not the corsair fan lights.

In windows I only see one of the 960 Pros. Both show in bios but not windows.

I know its a lot but I figured id put every little thing in case they are related. Even with all those problems everything is on and running cool.
 
Solution
rocktalkrock
1. Ram speeds above 2666MHz are considered an overclock on this motherboard.
2. The Corsair fan lights my need to be enable in desktop software.
3. Look in "Device Manager > Disk drives" to see if both your SSD's are listed.

Asus Maximus X Hero - Memory:
4 x DIMM, Max. 64GB, DDR4 4133(O.C.)/4000(O.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.)/3000(O.C.)/2800(O.C.)/2666/2400/2133 MHz Non-ECC, Un-buffered Memory
Sort by date Sort by votes
rocktalkrock

rocktalkrock

Judicious
Jul 4, 2017
6,077
280
36,640
1. Ram speeds above 2666MHz are considered an overclock on this motherboard.
2. The Corsair fan lights my need to be enable in desktop software.
3. Look in "Device Manager > Disk drives" to see if both your SSD's are listed.

Asus Maximus X Hero - Memory:
4 x DIMM, Max. 64GB, DDR4 4133(O.C.)/4000(O.C.)/3866(O.C.)/3733(O.C.)/3600(O.C.)/3466(O.C.)/3400(O.C.)/3333(O.C.)/3300(O.C.)/3200(O.C.)/3000(O.C.)/2800(O.C.)/2666/2400/2133 MHz Non-ECC, Un-buffered Memory
 
Upvote 0 Downvote
Solution
C

crusader7925

May 11, 2018
5
0
10
Thanks ive gotten everything cleared except the fan lights but ill fool with that when I get some spare time. The Missing drive was due to a bios setting error on my part. The other "errors" just appear to be the boards response to overclocking. If I leave everything at factory settings I get the A0 k symbol!
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom