Hello. My pc(ryzen 1700,asrock ab350mpro4, hyperx predator 8gb 3000mhz,asus dual gtx 1070, ssd wd green) was running fine until 1-2 months ago. Yesterday it started crashing every 1 minute and the only solution was to force shut down the pc. What i ve done and why i think this is a mobo problem. I ve tested cpu,ram and ssd - no problem showed, clean install windows and bios - again no problem. What i m supposed to do? Has anybody experienced the same thing? Thanks
asrock ab350m pro4
- Thread starter r_alex19
- Start date
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
well, if it's failing it could cause random crashes like that.
So could ram issues. When you say you tested your ram, do you mean with memtest? If it's with some other app, I'de suggest using memtest and doing a comprehensive test to ensure it's sound.
So could ram issues. When you say you tested your ram, do you mean with memtest? If it's with some other app, I'de suggest using memtest and doing a comprehensive test to ensure it's sound.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
check temps when gaming. Use something like HWMon/Info, and watch your CPU/GPU temps. Could be thermal issues. Thermal issues normally present with slow downs, as opposed to shut downs. But it could be that.
Also, if you've OC'ed any components run them at stock and see how it affects things. An unstable OC can cause exactly these issues.
Also, if you've OC'ed any components run them at stock and see how it affects things. An unstable OC can cause exactly these issues.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
Temps for gaming don't seem too high.
Set everything at stock. Run Prime95 small FFT's and see what temps you hit. You should be hitting about 70c at stock. Report back.
I ve ran the test for 40m more ( i forgot that by reseting the bios coolers were on medium speed. i ve set them on high). temps now are max 60.
what is interesting is that pc hasnt crashed while prime was opened.
Any ideas?
After closing prime it crashed but i catch the voltage and usage pic.
I'll attach this : https://imgur.com/a/bQqbfis
what is interesting is that pc hasnt crashed while prime was opened.
Any ideas?
After closing prime it crashed but i catch the voltage and usage pic.
I'll attach this : https://imgur.com/a/bQqbfis
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
Ideally, for the purpose of finding out stock temps, i'd leave the fan curve on normal/standard. The reason being just to get an idea of the actual baseline with no OC's and/or fans switched on to high to give different results. The screenshot looks fine, but it's at no load level, so it doesn't mean much. Your core voltage seems to be set about 1.33 though, with a max of 1.43. Whats going on there? Have you got the vcore set on auto?
Admittedly it is a little peculiar. It's running Prime with low-ish temps and doesn't crash, but then does when you exit Prime.
Something is a miss. Have you other settings changed in the bios. Have you reset the bios to default? Upgraded to latest bios? Do those things and set everything to stock and monitor again.
What PSU do you have? Really need to know that. I suspect it's that.
Admittedly it is a little peculiar. It's running Prime with low-ish temps and doesn't crash, but then does when you exit Prime.
Something is a miss. Have you other settings changed in the bios. Have you reset the bios to default? Upgraded to latest bios? Do those things and set everything to stock and monitor again.
What PSU do you have? Really need to know that. I suspect it's that.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
It's a decent PSU, nothing fantastic. But it's quite an old model. How old is it? I'd suspect 4 years or so or more. It's prob out of warranty, and may be starting to fail.
Nope. Like 6 months. I bought all the parts together.
Suspend to ram - disabled
Acpi hpet table - disabled
I left the system open in idle for 1.30 hours. No freeze. When i started HwMonitor it crashed.
:-??
tried 1 more time now when i got back to pc there was no signal
pfff. i m tired of this
Suspend to ram - disabled
Acpi hpet table - disabled
I left the system open in idle for 1.30 hours. No freeze. When i started HwMonitor it crashed.
:-??
tried 1 more time now when i got back to pc there was no signal
pfff. i m tired of this
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
okay, first things first. No need to PM someone to go and answer your latest thread post. Some of us (me included) have other things to do, work, home life etc. I will get back to you asap. I don't need reminders 
Okay, I doubt the PSU is new. Can you confirm that? I guess it could be the mobo too, but I suspect it's the PSU.
Okay, I doubt the PSU is new. Can you confirm that? I guess it could be the mobo too, but I suspect it's the PSU.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
The 3000 mhz is your base clock. You're 3.2 is the bas with XFR (this is normal) Your max turbo is 3.7.
Have you still got vcore set on auto? Thats why it's hitting the 1.42 mark.
I guess it could be your mobo.
Have you still got vcore set on auto? Thats why it's hitting the 1.42 mark.
I guess it could be your mobo.
Roland Of Gilead
Titan
- Aug 8, 2008
- 10,345
- 2,267
- 77,690
I don't get why it's showing 1.4 in CPUZ if you've set it at 1.2 in the bios.
Have you tried a CMOS reset? Try that and then see how you get on.
Have you tried a CMOS reset? Try that and then see how you get on.
TRENDING THREADS
-
-
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session- Started by Admin
- Replies: 58
Facebook
Twitter
Instagram