- Aug 2, 2017
- 5
- 0
- 10,510
So i bought a used pc from a friend and replaced the case and cooler while i did this i cleaned out under the cpu with pressurized air
I put he pc back together in the new case and tried a boot fans spun up and changed speed but no post beep/video signal
After trouble shooting turning the pc off and on i got a dead ram beep so i took the ram out and it went back to nothing and after that i got a dead ram beep and the other stick in my pc started smoking
After i tore down the pc and found a lga pin shorting with another pin i bent the pin back into place
Is there any way to test if the board/cpu still works without buying new hardware
Cpu I5-6600 (possibly dead)
M-board Asrock Z170a-x1/3.1 (possibly dead)
Grpx card 1060 (working)
Crusial ddr4 dual channal 8 gb (both sticks are dead)
500 watt psu (don't remember what it was i sold it it still worked fine after)
I put he pc back together in the new case and tried a boot fans spun up and changed speed but no post beep/video signal
After trouble shooting turning the pc off and on i got a dead ram beep so i took the ram out and it went back to nothing and after that i got a dead ram beep and the other stick in my pc started smoking
After i tore down the pc and found a lga pin shorting with another pin i bent the pin back into place
Is there any way to test if the board/cpu still works without buying new hardware
Cpu I5-6600 (possibly dead)
M-board Asrock Z170a-x1/3.1 (possibly dead)
Grpx card 1060 (working)
Crusial ddr4 dual channal 8 gb (both sticks are dead)
500 watt psu (don't remember what it was i sold it it still worked fine after)
Facebook
Twitter
Instagram