Hi all,
I got a ID COOLER Auraflow 240mm water cooler for my Ryzen 2600.
I installed it properly but the pump doesn’t want to work. On the bios the pump is always a 0rpm.
The radiator is installed at the front of my NZXT S340 Elite case where it’s meant to be.
The cpu runs at 90c idle with the non working pump.
I have the pump connected to my cpu_fan header. I tried using the pump_fan but also no luck.
I am starting to wonder if the pump itself is the issue or if my motherboard is the issue.
My specs are
Ryzen 2600
GTX 1070
Corsair CX650M 650W
2x8gb DDR4 2400MHz
Please help me fix my AIO pump.
Thanks
I got a ID COOLER Auraflow 240mm water cooler for my Ryzen 2600.
I installed it properly but the pump doesn’t want to work. On the bios the pump is always a 0rpm.
The radiator is installed at the front of my NZXT S340 Elite case where it’s meant to be.
The cpu runs at 90c idle with the non working pump.
I have the pump connected to my cpu_fan header. I tried using the pump_fan but also no luck.
I am starting to wonder if the pump itself is the issue or if my motherboard is the issue.
My specs are
Ryzen 2600
GTX 1070
Corsair CX650M 650W
2x8gb DDR4 2400MHz
Please help me fix my AIO pump.
Thanks