New Build Turns on for few seconds and then off

Toggle sidebar Toggle sidebar
Z

zhashey

Prominent
Jun 1, 2018
6
0
510
I built a desktop and I was trying to boot it up but it won’t go to bios and I am getting no signal through the mouse, keyboard, speakers and monitor. It turns on and runs for a few seconds then off again if I have the 4 pin ATX 12V connected to the power supply and doesn’t turn off at all if I don’t, but it still won’t boot BIOS. I have re done all the connections to the power supply and re tried and I have gotten nothing. I am planning on getting a new cr 2032 battery for my motherboard to see if that is the problem
 
Solution
A
Those specs are not compatible. You cannot run an 8100 on a H110.

The i3 8100 need a B360, H310, H370 or Z370 to run. While they are both the LGA 1151, the 8th gen series of processors are essentially LGA 1151v2, so need the B360, H310, H370 or Z370 motherboards to run.
Sort by date Sort by votes
Z

zhashey

Prominent
Jun 1, 2018
6
0
510
i3-8100 Processor 3.6GHz LGA1151 300 Series 65W

Corsair CX Series 450 Watt 80 Plus Bronze Certified Modular Power Supply (CP-9020101-NA)

GIGABYTE GA-H110M-A LGA1151 Intel H110 Micro ATX DDR4 Motherboard

Corsair Vengeance LPX 8GB (1 x 8GB) DDR4 DRAM 2400MHz (PC4-19200) C14 Memory Kit

EVGA GeForce GTX 1050 Ti FTW Graphic Card
 
Upvote 0 Downvote
A

ArchitSahu

Splendid
Apr 11, 2014
3,067
35
25,390
Those specs are not compatible. You cannot run an 8100 on a H110.

The i3 8100 need a B360, H310, H370 or Z370 to run. While they are both the LGA 1151, the 8th gen series of processors are essentially LGA 1151v2, so need the B360, H310, H370 or Z370 motherboards to run.
 
Upvote 1 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom