Palit GTX 1060 Dual 6GB Custom Cooler

G

Guest

Guest
Does anyone of you know if an "Arctic Mono Plus" custom cooler would fit on my "Palit Geforce GTX 1060 Dual 6GB" and if it would make a positive difference in temperature and noise?
The stock fans are just too loud in my opinion and therefore i want to replace them.

I was about to buy an Arctic Accelero Twin Turbo II but since my GPU got a custom PCB it won't fit. The mono however should fit since it is much smaller, right?


 
Solution
Yes it will fit your 1060

First review on amazon.....

Fits my EVGA GTX 1060 6GB SC perfectly. It also keeps it cool, very cool. It's also quiet, very quiet. Able to run stable overclock with an offset of +260mHz on the GPU and due to the RAM heatsinks included, +200 mHz on the RAM and temps never get above 55 degrees C! Well worth a purchase if your stock cooler isn't sufficient or too loud (did I mention this cooler is quiet?)

It is big for a single fan cooler so you may have trouble fitting this into smaller cases (I had to remove the slim 15mm fan on the side panel to allow it to fit) but if you've got the room, need to upgrade your cooler and/or want to OC your card, this is a great, cheap, cooler. Highly recommended.

Mattp2017

Honorable
Jan 25, 2017
393
9
10,865
Yes it will fit your 1060

First review on amazon.....

Fits my EVGA GTX 1060 6GB SC perfectly. It also keeps it cool, very cool. It's also quiet, very quiet. Able to run stable overclock with an offset of +260mHz on the GPU and due to the RAM heatsinks included, +200 mHz on the RAM and temps never get above 55 degrees C! Well worth a purchase if your stock cooler isn't sufficient or too loud (did I mention this cooler is quiet?)

It is big for a single fan cooler so you may have trouble fitting this into smaller cases (I had to remove the slim 15mm fan on the side panel to allow it to fit) but if you've got the room, need to upgrade your cooler and/or want to OC your card, this is a great, cheap, cooler. Highly recommended.
 
Solution