Can my Foxconn Eton 1.0 support GTX 1050?

Jun 12, 2018
4
0
10
can i put gtx 1050 in my FOXCONN ETON !.0 my bios version is 5.09 (date 11/27/2009) PCI-Express x16
i have a GT 730 but i was wondering if i can upgrade my gpu.
 
Need full system specs, not just the motherboard. A motherboard from 2009 is likely to have issues with a newer video card in any case. Looks like that thing is from an HP computer, and the CPU would be a Core 2 Duo or Quad. Not a very good CPU to use for a video card upgrade. I'd keep the system as it is till you can replace the full computer.
 
Jun 12, 2018
4
0
10
How about gt 1030 do you think my mobo is compatible with that or i need to buy a new computer, can you give some advice what specs to choose for rainbow six etc. Thanks

Sorry for bad english
 


1030 is from same generation as the 1050, so if the 1050 won't work in the motherboard, the 1030 is not likely to also. You can email support of a few video card vendors that are available in your area and check what video cards they have that will work with a non-eufi BIOS.

You also did not list your system specs aside from the motherboard, what power supply do you have? Is the case large enough to hold the card?
 

budgetgamer12345

Respectable
Sep 8, 2017
490
3
1,965
http://www.findlaptopdriver.com/specs-eton-1-0-foxconn/ These are the motherboard specs.
It has also DDR3 ram support, right?
Everything seems to be ok, just upgrade your BIOS to the latest version so you can get the graphics card working on your mobo. If you have the GT 730 at home just try it out!

Upgrade your CPU to Core 2 Quad Q8xx0/Q9xx0 series and upgrade your ram to 4GB (2x2GB DDR3) since that is the max ram amount the mobo supports.
Make sure if you place a GPU on that mobo, disable onboard graphics and set PCIE as primary boot display.
 
Jun 12, 2018
4
0
10




my cpu was core 2 quad q8400 and my ram is already 4gb ddr3 but i dont know how to update my BIOS