Turn off anti-surge feature on MB??

jonroberts26

Honorable
Sep 18, 2013
83
0
10,630
I am having crash issues with 2 year old computer.
My psu is a seasonic 860 platinum. I sent an email asking for rma info and they said to double check other parts. Most everything I can find blames psu or driver issues. In their (seasonic's) faqs, I found this recommendation:

The built-in anti-surge feature on some motherboards is known to produce false-positive readings while monitoring the output voltages of the power supply. Seasonic power supplies have their own integral safety features to protect all the components against electrical damage. When your system shuts down due to this problem in the motherboard, please follow these steps:

Update the BIOS of your motherboard to the latest version available.
Check the power supply’s output readings in the BIOS.
If all seems to be normal then turn OFF your motherboard’s anti-surge protection.
To make sure that everything runs properly, you can check your benchmark scores (Futuremark, OCCT, etc.)

Is this a very good idea?

It seems like turning this off is asking for further problems.
 
Solution
start with the bios...most new mb the bios will show the voltage on the three main rails of power supplys. make sure it within atx spec. with a large seasonic unit the 12v rail may read 11.8 volts some units if there a light load on them the 12v rail can read low on some mb. download hardware info set it to logging and see if one of the rails under load goes south.
start with the bios...most new mb the bios will show the voltage on the three main rails of power supplys. make sure it within atx spec. with a large seasonic unit the 12v rail may read 11.8 volts some units if there a light load on them the 12v rail can read low on some mb. download hardware info set it to logging and see if one of the rails under load goes south.
 
Solution