Hello All,
I have my rig and i use it basically for studying and lab purpose. Configuration is as follows
> Intel Core i-7 6700 3.4 GHz
> 16X4 Corsair Vengeance 2400 MHz
> Gigabyte MOBO GA-H170M-D3H DDR4
one fine day i checked the CPU-Z application and realized that my RAM shows just showed 1066.7 MHz under DRAM frequency section. (screen shot attached) this raised my concern as I would like to have full benefit of hat I paid for. So I ran an online test on site http://www.userbenchmark.com it gave me all the results and under RAM section there was a warning it said “Performing below potential (34th percentile) - ensure that a dual+ channel XMP BIOS profile is enabled”. Now this kinda banged my head and I started finding the XMP settings on my mother board. But couldn’t locate any. I have BIOS screen shots attached. It gives me a lot of options to customize my RAM but nowhere has an option called XMP. All screen shots attached
any help would be greatly appreciated.
all pictures stored on the link.
https://ibb.co/cMg9ud
https://ibb.co/fHO00J
https://ibb.co/iXqf0J
https://ibb.co/ntD00J
https://ibb.co/d9Jpud
https://ibb.co/bELf0J
https://ibb.co/h2PvZd
https://ibb.co/kG4Jny
https://ibb.co/nbPjSy
https://ibb.co/ey4jSy
https://ibb.co/bsGaZd
https://ibb.co/bTgaZd
https://ibb.co/eMRW7y
https://ibb.co/h1Ar7y
https://ibb.co/f3B9ud
https://ibb.co/bB1aZd
https://ibb.co/cRwQZd
https://ibb.co/gSXony
https://ibb.co/hsJuSy
https://ibb.co/mBwQZd
https://ibb.co/c3Bg7y
https://ibb.co/f1VkZd
https://ibb.co/mxHzud
https://ibb.co/bQuOLJ
https://ibb.co/hmzjSy
I have my rig and i use it basically for studying and lab purpose. Configuration is as follows
> Intel Core i-7 6700 3.4 GHz
> 16X4 Corsair Vengeance 2400 MHz
> Gigabyte MOBO GA-H170M-D3H DDR4
one fine day i checked the CPU-Z application and realized that my RAM shows just showed 1066.7 MHz under DRAM frequency section. (screen shot attached) this raised my concern as I would like to have full benefit of hat I paid for. So I ran an online test on site http://www.userbenchmark.com it gave me all the results and under RAM section there was a warning it said “Performing below potential (34th percentile) - ensure that a dual+ channel XMP BIOS profile is enabled”. Now this kinda banged my head and I started finding the XMP settings on my mother board. But couldn’t locate any. I have BIOS screen shots attached. It gives me a lot of options to customize my RAM but nowhere has an option called XMP. All screen shots attached
any help would be greatly appreciated.
all pictures stored on the link.
https://ibb.co/cMg9ud
https://ibb.co/fHO00J
https://ibb.co/iXqf0J
https://ibb.co/ntD00J
https://ibb.co/d9Jpud
https://ibb.co/bELf0J
https://ibb.co/h2PvZd
https://ibb.co/kG4Jny
https://ibb.co/nbPjSy
https://ibb.co/ey4jSy
https://ibb.co/bsGaZd
https://ibb.co/bTgaZd
https://ibb.co/eMRW7y
https://ibb.co/h1Ar7y
https://ibb.co/f3B9ud
https://ibb.co/bB1aZd
https://ibb.co/cRwQZd
https://ibb.co/gSXony
https://ibb.co/hsJuSy
https://ibb.co/mBwQZd
https://ibb.co/c3Bg7y
https://ibb.co/f1VkZd
https://ibb.co/mxHzud
https://ibb.co/bQuOLJ
https://ibb.co/hmzjSy