You say, "When i plug in my head phones with the spliter ...". What is this Splitter? Let me explain my question.
One type of splitter is used to connect two or more output devices (like headphones and a speaker) to a single source jack so both can be heard. But there's another type for a different purpose.
The heaphones you have use a particular design of connector on the end of the cable. Look at it closely. It has FOUR contacts: Tip, Ring1, Ring2, and Sleeve. In this system, often Tip is for the microphone, the two Rings are for left and right stereo signals, and Sleeve is common Ground. Now, most output jacks on a mobo or sound card do NOT use this system. Instead, they use separate jacks: one for the front two stereo signals, and another for the microphone. For each of these, the plug has only ONE Sleeve (3 contacts). The plug for the front speakers (and headphone) uses Tip for one stereo channel, Ring for the other, and Sleeve for Ground. The Mic plug uses Tip for the mic, Sleeve for the Ground, and may NOT use the Ring at all, or MAY use the Ring for the second channel of a stereo mirophone. So, that 4-contact plug your headphones has will not work properly with a 3-contact jack. For that purpose you need another type of adapter or "splitter" that separates the four contacts system on the end of your headphone cable into two plugs of the 3-contacts type that DO match the jacks on your audio outputs. It looks like this
https://www.newegg.com/Product/Product.aspx?Item=9SIABU95R43693&cm_re=headphone_adapter-_-9SIABU95R43693-_-Product
Note that it specifies that its female jack has FOUR positions (matches the plug on the end of your headset cable) and there are two output arms ending in 3-position plugs. One is color-coded green to plug into the front speaker jack on your sound card or mobo back panel or into the front panel earphone jack, and the other coded red for the microphone jack.
So, when you said "splitter", did you mean the first type or the second? The second type I explained really is an adapter to convert from one plug type to another, but some might call it a Splitter because it has two cable arms. If you do not have one of these adapters, get one to solve your problem.