GIGABYTE uefi dualbios boot loop

microtechsteve · Jun 26, 2018

Recently, my GPU crashed and I turned my pc on and off multiple times to try to get the bios screen. However, I found out that I had fast boot on. I turned it off and continued to the bios screen. To my surprise, the bios screen appears, but then the screen turns black and then flashes the uefi dualbios screen. The pc then turns off and then does the loop. I’m currently on a gigabyte h97m-d3m.

ron2456 · Jun 26, 2018

Try to clear cmos using jumper method or just remove the 3v coincell for some hours and then put it back in and start pc.

microtechsteve · Jun 26, 2018

ron2456 :

After removing the cmos battery and putting it back in, the pc only turns on and then off in a loop without the screen even turning on.

ron2456 · Jun 26, 2018

Unplug the gpu and try it on the i-Gpu.

microtechsteve · Jun 26, 2018

ron2456 :

I just did that and I also replaced the cmos battery. Still the same problem occurs.

ron2456 · Jun 27, 2018

Then try troubleshooting as per the following link

http://www.tomshardware.com/faq/id-2176482/breadboarding-stripping-basics-troubleshooting.html

microtechsteve · Jun 27, 2018

I successfully fixed it. I took a paper clip and I shorted the main bios while turning on the computer. I shorted the 1 and 6 pin.

Search

GIGABYTE uefi dualbios boot loop

microtechsteve

Prominent

ron2456

Distinguished

microtechsteve

Prominent

ron2456

Distinguished

microtechsteve

Prominent

ron2456

Distinguished

microtechsteve

Prominent

TRENDING THREADS

Latest posts

Moderators online

Share this page