- Aug 11, 2016
- 11
- 0
- 1,510
I recently reinstalled windows on my machine, and during the first time boot with my gpu installed (xfx rs Rx 480) I wasn't getting any output. No problem, I took out my graphics card and used the integrated graphics of the CPU. This worked fine, and I was able to get into bios and windows.
However, after installing windows, I wanted to get both monitors set up so I re installed the gpu, plugged in 1 monitor, and booted back up again. No graphics this time once again, however fans were spinning and lights were blinking on the gpu, but a black screen on the monitor.
To troubleshoot, I took out the gpu again, hoping to look for driver issues or something, and plugged my monitor back into the motherboard. Now, black screen on the monitor again. No combination of resetting the cmos, leaving the gpu in while using igpu, just gpu, or just igpu has worked.
Any help is appreciated, and I apologize for the long winded post.
However, after installing windows, I wanted to get both monitors set up so I re installed the gpu, plugged in 1 monitor, and booted back up again. No graphics this time once again, however fans were spinning and lights were blinking on the gpu, but a black screen on the monitor.
To troubleshoot, I took out the gpu again, hoping to look for driver issues or something, and plugged my monitor back into the motherboard. Now, black screen on the monitor again. No combination of resetting the cmos, leaving the gpu in while using igpu, just gpu, or just igpu has worked.
Any help is appreciated, and I apologize for the long winded post.
Facebook
Twitter
Instagram