Best overclock settings for GTX 1070 ti?
- Thread starter swdfoab
- Start date
Solution
Barty1884
Retired Moderator
- Apr 16, 2015
- 22,250
- 1,350
- 108,740
Results will vary, depending on the quality of the chip & cooling system.
https://www.tomshardware.com/reviews/nvidia-geforce-gtx-1070-ti-8gb,5311-18.html
Maximum performance, you'll have to fine tune yourself.
A typical card should be able to do +175 on the Core and +150 on the Memory. No guarantees though.
Some cards will do +200 or more on the core, others will fall a ways short of that.
https://www.tomshardware.com/reviews/nvidia-geforce-gtx-1070-ti-8gb,5311-18.html
Maximum performance, you'll have to fine tune yourself.
A typical card should be able to do +175 on the Core and +150 on the Memory. No guarantees though.
Some cards will do +200 or more on the core, others will fall a ways short of that.
zebarjadi.raouf
Commendable
- Jul 10, 2018
- 862
- 2
- 1,310
Hi, you have to try really hard to damage newer GPUs with software OC.
Open MSI Afterburner, max your power limit, increase your core clock 50+ at a time while testing with UNIGINE Valley or Heaven benchmark at Ultra till artifacts (weird lines and colors) happen or your driver crashes. Then fine tune it by increasing 10 at a time from your previous clock. Do the same for Memory, then save your profile. Don't check apply overclocking at startup.
Example Core clock: +50 > +100 > +150 > crash > +110 > +120 > ....
Keep your temps below 85c, if you go over it or stay near it., consider installing a fan on your case near the GPU.
Open MSI Afterburner, max your power limit, increase your core clock 50+ at a time while testing with UNIGINE Valley or Heaven benchmark at Ultra till artifacts (weird lines and colors) happen or your driver crashes. Then fine tune it by increasing 10 at a time from your previous clock. Do the same for Memory, then save your profile. Don't check apply overclocking at startup.
Example Core clock: +50 > +100 > +150 > crash > +110 > +120 > ....
Keep your temps below 85c, if you go over it or stay near it., consider installing a fan on your case near the GPU.
TRENDING THREADS
-
-
-
Question should i put the new 3050 lp in a sff hp g3?- Started by jordanbuilds1
- Replies: 14
-
Question Case has 2x front USB 3.0 plugs but the board only has one USB 3.0 connector.
- Started by knowledge2121
- Replies: 5
-
Question What Cat6 Ethernet Cable Should I Get? I'm From The UK
- Started by legendairyjoe
- Replies: 3
-
-
Facebook
Twitter
Instagram