Masterliquid lite 240

Toggle sidebar Toggle sidebar
Multyspeed

Multyspeed

Distinguished
Sep 10, 2015
164
24
18,615
Hi all, I have some questions about Cooler Master Masterliquid Lite 240.
1. Can I change the directions of the pipes from the pump side? Now ther are facing forward and I would like them to go up.
2. I'm using my pump at 60% (1750) rpm. Should it stay at 100% power or i can adjust it as the temps go up?
 
Sort by date Sort by votes
O

OCD Tweaker

Reputable
Aug 19, 2015
393
0
4,960
forgive me if i miss understand or miss read your post

for your AIO if you want the tubes running up and down you will have to mount the radiator on the top of the case
(you are not able to change physical location of where the tubes are heading out of the pump)

i would plug the pump into the cpu header and let the cpu control the how fast the the pump spins
 
Upvote 0 Downvote
Multyspeed

Multyspeed

Distinguished
Sep 10, 2015
164
24
18,615
The first qurstion is more for the aesthetics.
The second one is importent for me. The pump is plug in the chasis header and the two fans - to the cpu header.
The pump is controlled by 3pin connector. If it was PWM pump ok, but since it is not what are the recommendations ? Full speed or i can set it to lower power
 
Upvote 0 Downvote
O

OCD Tweaker

Reputable
Aug 19, 2015
393
0
4,960
you can still plug a 3 pin connector into a 4pin header that will give the control over to the CPU

if you like to do things that are very spu intensive i would have the pump set to 100% if your not 60% would be more that fine

god all honesty if your not doing anything very cpu intensive i would just make my own pump/fan curve have everything set to low until the cpu reaches like 50c and start increasing the curve from there
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom