Need better tempratures with overclocking.

Jun 8, 2018
8
0
10
This is my setup, and i wanted to put both the cpu and gpu on a proper watercooling.

Is my case good for it, or need to replace?

what parts should i look in to to do it?

dont need the fancy colours , just wanted something that would keep my system on a cooler note and longer times for every maintence.

at the moment cpu is overcloked to 4.8gh and gpu on 2.0gh. if ambient temprature is hotter than 26 degrees the cpu hits 100 degrees under load ( gaming mostly and at this point shut down)so i had to open my case,

gpu hangs on 54 but power sensor goes up to 70.

i would like to keep it under 35 both or as close as possible.

I dont realy have a lot of experience with watercooling, so i wanted some advice.

I was looking on something with 2 360 radiators ( and the fans that go with it).

Thanks in advance for all the help!!

https://uk.pcpartpicker.com/list/hGsbkd
 
Solution
The case you chose was fine for what the pcpartpicker shows you put in it, but not if you want to step up to a custom water cooling loop and have any results better than what you're getting now.

So the first thing you need to do is research cases that are actually designed for water cooling, not imitation water cooling.
The case you chose was fine for what the pcpartpicker shows you put in it, but not if you want to step up to a custom water cooling loop and have any results better than what you're getting now.

So the first thing you need to do is research cases that are actually designed for water cooling, not imitation water cooling.
 
Solution